- Strongly recommended applying Mercury Bead after Titanium Shield. Please allow Titanium Shield to dry completely for at least 2 hours.
- If Titanium Shield is not applied, please use Car Alchemist PREP to clean the surface.
- Shake Mercury Bead bottle before use.
- Apply a thick layer of Mercury Bead in criss cross motion on applicator and suede cloth provided in the package. Make sure to level the coating on the cloth, further second criss cross application is needed to make even level.
- Mercury Bead MUST be applied one panel at the time due to its super hydrophobic properties. For large panels such as the bonnet and quarter panels please divide work into smaller sections. Using up and down with side to side motion to apply the coating.
- Allow the coating to bond 5 mins and start to wipe off with dry and clean Everyday Microfibre Wipe. Make sure there is no residue on the panel. Then move on to another panel to repeat the process
- Allow the coating to cure at least 12 to 24 hours for best results.
Skin protection recommended
work in a well-ventilated place.
Store in a dry and cool place.
keep out of reach for Children.
Avoid applying in direct sunlight.